Show simple item record

dc.contributor.authorS. J. Hudak
dc.contributor.authorO. H. Burnside
dc.contributor.authorK. S. Chan
dc.date.accessioned2017-05-08T23:19:56Z
dc.date.available2017-05-08T23:19:56Z
dc.date.copyrightJune, 1985
dc.date.issued1985
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26404#212_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99680
dc.description.abstractAn improved fracture mechanics model for fatigue crack growth in welded tubular joints is developed. Primary improvements include the use of a wide-ranged equation for the fatigue crack growth rate properties and the incorporation of the influence of local weld-toe geometry into the stress intensity factor equations. The latter is shown to explain the dependence of the fatigue life on the size of tubular joints. Good agreement between predicted and measure fatigue lives of full-scale joints tested in air further supports the applicability of the fracture mechanics approach to offshore structures. Although the model should also be applicable to corrosion fatigue, additional imput data and verification testing are needed under these conditions. Factors which could improve the model are discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Corrosion Fatigue Crack Growth in Welded Tubular Joints
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231179
dc.journal.fristpage212
dc.journal.lastpage219
dc.identifier.eissn1528-8994
dc.keywordsCorrosion
dc.keywordsFatigue cracks
dc.keywordsTubular joints
dc.keywordsEquations
dc.keywordsFracture mechanics
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsOffshore structures
dc.keywordsFatigue life
dc.keywordsGeometry AND Testing
dc.treeJournal of Energy Resources Technology:;1985:;volume( 107 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record