Show simple item record

dc.contributor.authorD. M. Cole
dc.date.accessioned2017-05-08T23:19:54Z
dc.date.available2017-05-08T23:19:54Z
dc.date.copyrightSeptember, 1985
dc.date.issued1985
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26406#369_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99663
dc.description.abstractThis work presents the results of uniaxial compression tests on freshwater polycrystalline ice. Grain size of the test material ranged from 1.5 to 5 mm, strain rate ranged from 10−6 to 10−2 s−1 and the temperature was −5°C. The grain size effect emerged clearly as the strain rate increased to 10−5 s−1 and persisted to the highest applied strain rates. On average, the stated increase in grain size brought about a decrease in peak stress of approximately 31 percent. The occurrence of the grain size effect coincided with the onset of visible cracking. The strength of the material increased to a maximum at a strain rate of 10−3 s−1 , and then dropped somewhat as the strain rate increased further to 10−2 s−1 . Strain at peak stress generally tended to decrease with both increasing grain size and increasing strain rate. The results are discussed in terms of the deformational mechanisms which lead to the observed behavior.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGrain Size and the Compressive Strength of Ice
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231203
dc.journal.fristpage369
dc.journal.lastpage374
dc.identifier.eissn1528-8994
dc.keywordsCompressive strength
dc.keywordsIce
dc.keywordsGrain size
dc.keywordsStress
dc.keywordsMechanisms
dc.keywordsCompression
dc.keywordsFracture (Process)
dc.keywordsTemperature AND Testing equipment
dc.treeJournal of Energy Resources Technology:;1985:;volume( 107 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record