Show simple item record

dc.contributor.authorH. C. Rhee
dc.contributor.authorM. M. Salama
dc.date.accessioned2017-05-08T23:19:51Z
dc.date.available2017-05-08T23:19:51Z
dc.date.copyrightDecember, 1985
dc.date.issued1985
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26408#479_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99640
dc.description.abstractA comparative study was performed to evaluate the three most widely used elastic-plastic fracture mechanics methodologies. The three methods are the crack opening displacement (COD) design curve, which is widely used in the offshore industry, the British Central Electricity Generating Board (CEGB) R6 method, and the J -resistance curve method. Analyses of various flawed geometries based on these three methods were performed using consistent material fracture properties. The results of both the COD and R6 methods were compared with those of the J -resistance curve, which is the most rigorous of the three methods. The results of the COD concept, following BSI PD 6493 procedures, appear to be conservative at applied stress levels below 60 percent of the material yield strength and unconservative above this value. However, the results of the R6 method appear to be consistently conservative. The behavior of COD design curve solutions can be improved when the structural geometry and the actual stress-strain relationship are properly considered in the analyses.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleComparative Evaluation of Fracture Mechanics Methodologies as Applied to Offshore Structural Design and Integrity Analyses
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231222
dc.journal.fristpage479
dc.journal.lastpage484
dc.identifier.eissn1528-8994
dc.keywordsFracture mechanics
dc.keywordsOffshore structural design
dc.keywordsElectrical resistance
dc.keywordsFracture (Materials)
dc.keywordsDesign
dc.keywordsStress-strain relations
dc.keywordsDisplacement
dc.keywordsGeometry
dc.keywordsYield strength
dc.keywordsStress AND Ocean engineering
dc.treeJournal of Energy Resources Technology:;1985:;volume( 107 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record