Show simple item record

dc.contributor.authorG. S. Triantafyllou
dc.contributor.authorC. Chryssostomidis
dc.date.accessioned2017-05-08T23:19:51Z
dc.date.available2017-05-08T23:19:51Z
dc.date.copyrightDecember, 1985
dc.date.issued1985
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26408#421_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/99630
dc.description.abstractThe equation of motion of a long slender beam submerged in an infinite fluid moving with constant speed is derived using Hamilton’s principle. The upstream end of the beam is pinned and the downstream end is free to move. The resulting equation of motion is then used to perform the stability analysis of a string, i.e., a beam with negligible bending stiffness. It is found that the string is stable if (a ) the external tension at the free end exceeds the value of a U 2 , where a is the “added mass” of the string and U the fluid speed; or (b ) the length-over-diameter ratio exceeds the value 2Cf /π, where Cf is the frictional coefficient of the string.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStability of a String in Axial Flow
dc.typeJournal Paper
dc.journal.volume107
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231213
dc.journal.fristpage421
dc.journal.lastpage425
dc.identifier.eissn1528-8994
dc.keywordsStability
dc.keywordsString
dc.keywordsAxial flow
dc.keywordsEquations of motion
dc.keywordsFluids
dc.keywordsHamilton's principle
dc.keywordsStiffness AND Tension
dc.treeJournal of Energy Resources Technology:;1985:;volume( 107 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record