Show simple item record

dc.contributor.authorO. Watanabe
dc.contributor.authorH. Ohtsubo
dc.date.accessioned2017-05-08T23:18:40Z
dc.date.available2017-05-08T23:18:40Z
dc.date.copyrightFebruary, 1984
dc.date.issued1984
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28231#54_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98910
dc.description.abstractThis paper proposes a ring element for the stress analysis of mitred bends, which is an extension of ring elements for pipe bends proposed by the present authors. Since accurate treatments of continuity conditions on the connecting lines between straight pipe segments are employed and strain-displacement relations derived from the general thin shell theory with shear strains are considered, the present method can be applied to problems of mitred bends of complex configurations under general loading conditions. Shape functions are developed by trigonometric functions and Hermitian polynomials of second order in the circumferential and longitudinal directions, respectively. This finite element method requires fewer number of degrees of freedom for the same accuracy than the conventional shell elements.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Analysis of Mitred Bends by Ring Elements
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264309
dc.journal.fristpage54
dc.journal.lastpage62
dc.identifier.eissn1528-8978
dc.keywordsStress analysis (Engineering)
dc.keywordsFunctions
dc.keywordsPolynomials
dc.keywordsShapes
dc.keywordsShells
dc.keywordsThin shells
dc.keywordsPipe bends
dc.keywordsDegrees of freedom
dc.keywordsPipes
dc.keywordsDisplacement
dc.keywordsShear (Mechanics) AND Finite element methods
dc.treeJournal of Pressure Vessel Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record