Show simple item record

dc.contributor.authorD. Bushnell
dc.contributor.authorE. Meller
dc.date.accessioned2017-05-08T23:18:40Z
dc.date.available2017-05-08T23:18:40Z
dc.date.copyrightFebruary, 1984
dc.date.issued1984
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28231#2_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98904
dc.description.abstractA brief survey of plastic buckling of axially compressed cylindrical shells is given. Results of nonlinear finite element analyses of several axially compressed, ring-stiffened, steel, cylindrical shells are presented, including comparisons with tests conducted at Chicago Bridge and Iron Co. and at the Los Alamos National Laboratory (LANL). Some of the LANL specimens with radius-to-thickness ratio of about 450 have reinforced circular openings that cut across various numbers of ring stiffeners. These cylindrical shells are loaded by enforced axial displacement applied to thick aluminum end plates halfway between the axis of revolution and the shell wall. Measured imperfections are included in the analysis of one ring-stiffened specimen without any cutout. Inclusion of the imperfection field reduces the predicted collapse load by only eight percent. Reinforced openings that cut one or two or three rings reduce the collapse load by 14, 21 and 22 percent, respectively. Agreement between test and theory for the nonuniformly compressed LANL specimens is within 14 percent, even with initial imperfections neglected in the analysis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic-Plastic Collapse of Axially Compressed Cylindrical Shells: A Brief Survey With Particular-Application to Ring-Stiffened Cylindrical Shells With Reinforced Openings (Survey Paper)
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264305
dc.journal.fristpage2
dc.journal.lastpage16
dc.identifier.eissn1528-8978
dc.keywordsCollapse
dc.keywordsPipes
dc.keywordsStress
dc.keywordsFinite element analysis
dc.keywordsAluminum
dc.keywordsSteel
dc.keywordsDisplacement
dc.keywordsIron
dc.keywordsShells
dc.keywordsThickness
dc.keywordsPlates (structures) AND Buckling
dc.treeJournal of Pressure Vessel Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record