Show simple item record

dc.contributor.authorG. D. Galletly
dc.contributor.authorK. Pemsing
dc.date.accessioned2017-05-08T23:18:38Z
dc.date.available2017-05-08T23:18:38Z
dc.date.copyrightMay, 1984
dc.date.issued1984
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28236#134_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98887
dc.description.abstractThe test results on biaxially compressed metallic cylinders published before 1983, together with some early ones from a test program underway at Liverpool University, were plotted in terms of the stress ratios S p (=p /p k ) and S x (=σθ /σK ,θ ). These results were then compared with the predictions of the linear interaction equation S p + S x = 1 and two nonlinear ones. The minimum predicted buckling quantities p k and σk ,x were evaluated using the recommendations of ASME III N-284, DASt, DnV and ECCS. Based on this study, some possible design procedures for this interactive buckling problem are suggested.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn Design Procedures for the Buckling of Cylinders Under Combined Axial Compression and External Pressure
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264320
dc.journal.fristpage134
dc.journal.lastpage142
dc.identifier.eissn1528-8978
dc.keywordsDesign
dc.keywordsBuckling
dc.keywordsCompression
dc.keywordsCylinders
dc.keywordsExternal pressure
dc.keywordsStress AND Equations
dc.treeJournal of Pressure Vessel Technology:;1984:;volume( 106 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record