Show simple item record

dc.contributor.authorR. Sowerby
dc.contributor.authorI. O’Reilly
dc.contributor.authorN. Chandrasekaran
dc.contributor.authorN. L. Dung
dc.date.accessioned2017-05-08T23:18:09Z
dc.date.available2017-05-08T23:18:09Z
dc.date.copyrightJanuary, 1984
dc.date.issued1984
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26896#101_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98581
dc.description.abstractThe article describes a series of experiments, and some associated theoretical work, which should assist in assessing the suitability of certain steels designated for cold forging operations. The compression of a circular cylinder is often used to assess the cold forgeability, but with ductile materials the test can result in excessively high loads before surface cracking occurs. Some alternative upsetting procedures are described and the so-called collar test is recommended when studying the upsetting of ductile materials. Information is presented herein which indicates that a single fracture line, in the manner of Kuhn, is not applicable for a variety of steels when different upsetting tests are compared. The hoop, εθ , and axial, εz , strain history at the free surface of an upset specimen is employed to obtain the associated stress history using simple plasticity theory. Three distinct upsetting tests are analyzed using a finite element method and the predictions of the surface strains compare well with experimental data. The behavior of AISI 1045 and 1144 steels in the collar test is also examined. The steels were subjected to three different heat treatments, and the effect of composition and thermal processing on the fracture behavior is discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMaterials Testing for Cold Forging
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225668
dc.journal.fristpage101
dc.journal.lastpage106
dc.identifier.eissn1528-8889
dc.keywordsMaterials testing
dc.keywordsForging
dc.keywordsSteel
dc.keywordsFracture (Process)
dc.keywordsStress
dc.keywordsFinite element methods
dc.keywordsCircular cylinders
dc.keywordsCompression
dc.keywordsPlasticity AND Heat
dc.treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record