Show simple item record

dc.contributor.authorMohamed Hashish
dc.date.accessioned2017-05-08T23:18:09Z
dc.date.available2017-05-08T23:18:09Z
dc.date.copyrightJanuary, 1984
dc.date.issued1984
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26896#88_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98580
dc.description.abstractAn experimental and theoretical investigation was conducted to study the cutting of ductile metals with high-velocity abrasive jets. The investigation involved experimental cutting tests, visualization experiments, and model development. Data were generated to study the effects of abrasive-jet parameters on the depth and quality of cuts produced. These parameters included waterjet pressure, waterjet diameter, abrasive material, particle size, abrasive flow rate, traverse rate, and number of passes. The penetration process was found to be cyclic and to consist of more than one cutting regime as the kerf developed. In the first regime, particles impact the kerf wall at shallow angles, and cutting wear occurs; in the second, particles impact at large angles, causing deformation wear. A simplified model was developed to determine the optimum set of parameters for efficient high-quality machining of ductile metals. The model requires further refinement, however, to provide definitive results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Modeling Study of Metal Cutting With Abrasive Waterjets
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225682
dc.journal.fristpage88
dc.journal.lastpage100
dc.identifier.eissn1528-8889
dc.keywordsPressure
dc.keywordsFlow (Dynamics)
dc.keywordsDeformation
dc.keywordsWear
dc.keywordsMetals
dc.keywordsMachining
dc.keywordsAbrasives
dc.keywordsParticulate matter
dc.keywordsMetal cutting
dc.keywordsJets
dc.keywordsModeling
dc.keywordsVisualization
dc.keywordsCutting
dc.keywordsModel development AND Particle size
dc.treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record