Show simple item record

dc.contributor.authorS. Ganesh
dc.contributor.authorR. Viswanathan
dc.contributor.authorD. L. Newhouse
dc.date.accessioned2017-05-08T23:18:09Z
dc.date.available2017-05-08T23:18:09Z
dc.date.copyrightJanuary, 1984
dc.date.issued1984
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26896#71_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98576
dc.description.abstractA new high strength, nonmagnetic, iron-base alloy has been developed for large retaining ring application. This alloy is based on the development efforts recently completed in a previous collaboration between EPRI and the University of California, but takes advantage of the fact that tantalum, whose price is subject to fluctuations, can be successfully replaced partially or fully by niobium. Among the niobium modified versions evaluated, the alloy containing 1Nb + 1Ta provided the optimum combination of desired properties. This alloy, which has the approximate composition Fe-34.5Ni-5Cr-3Ti-1Nb-1Ta-0.5A1-1.0Mo-0.3V-0.01B, has demonstrated the capability to reach yield strength levels of around 200 ksi (1379 MPa), following controlled hot working, modest cold expansion and a double aging heat treatment. Compared to the currently used 18Mn-5Cr alloy, the new alloy exhibited superior stress corrosion resistance (in humid air and 3.5 percent NaCl) and comparable toughness in air and dry hydrogen. Physical properties such as density, magnetic permeability, thermal conductivity and coefficient of thermal expansion were found to be compatible with the requirements for retaining ring application. It is anticipated that successful achievement of similar properties in large-scale heats and subsequent commercialization can result in improved generator reliability, size capability and efficiency. This paper is a progress report on this development.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEvaluation of a New High Strength Austenitic Alloy for Generator Retaining Rings
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225679
dc.journal.fristpage71
dc.journal.lastpage78
dc.identifier.eissn1528-8889
dc.keywordsAlloys
dc.keywordsGenerators
dc.keywordsHydrogen
dc.keywordsIron
dc.keywordsTantalum
dc.keywordsToughness
dc.keywordsYield strength
dc.keywordsCollaboration
dc.keywordsElectrical resistance
dc.keywordsReliability
dc.keywordsStress corrosion cracking
dc.keywordsHeat treating (Metalworking)
dc.keywordsFluctuations (Physics)
dc.keywordsThermal conductivity
dc.keywordsDensity
dc.keywordsThermal expansion AND Permeability
dc.treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record