Show simple item record

dc.contributor.authorC. J. McMahon
dc.contributor.authorD. H. Gentner
dc.contributor.authorA. H. Ucisik
dc.date.accessioned2017-05-08T23:18:09Z
dc.date.available2017-05-08T23:18:09Z
dc.date.copyrightJanuary, 1984
dc.date.issued1984
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26896#66_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98575
dc.description.abstractMeasurements of FATT as a function of hardness, grain size, and fracture surface impurity concentration were made on a 2 1/4 Cr-1 Mo steel doped with Mn + Si + P in an effort to devise an embrittlement equation relating FATT to these variables, as done previously in NiCr and NiCrMoV steels. Observations of the hardness and grain size effects on an undoped steel were also made. The effects of variations of hardness and grain size were quite irregular, especially in the doped steel, and it was therefore not possible to develop the equation. The probable reasons for the inapplicability of this approach in the 2 1/4 Cr-1 Mo type of steel are discussed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Investigation of the Effects of Grain Size and Hardness in Temper-Embrittled 2 1/4 Cr-1 Mo Steel
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225678
dc.journal.fristpage66
dc.journal.lastpage70
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsGrain size
dc.keywordsEquations
dc.keywordsMeasurement
dc.keywordsFracture (Process) AND Embrittlement
dc.treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record