Show simple item record

dc.contributor.authorB. Dattaguru
dc.contributor.authorR. A. Everett
dc.contributor.authorJ. D. Whitcomb
dc.contributor.authorW. S. Johnson
dc.date.accessioned2017-05-08T23:18:08Z
dc.date.available2017-05-08T23:18:08Z
dc.date.copyrightJanuary, 1984
dc.date.issued1984
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26896#59_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98574
dc.description.abstractA geometrically nonlinear finite-element analysis of cohesive failure in typical joints is presented. Cracked-lap-shear joints were chosen for analysis. Results obtained from linear and nonlinear analysis show that nonlinear effects, due to large rotations, significantly affect the calculated mode I, crack opening, and mode II, inplane shear, strain-energy-release rates. The ratio of the mode I to mode II strain-energy-release rates (G I /G II ) was found to be strongly affected by the adhesive modulus and the adherend thickness. G I /G II ratios between 0.2 and 0.8 can be obtained by varying adherend thickness and using either a single or double cracked-lap-shear specimen configuration. Debond growth rate data, together with the analysis, indicate that mode I strain-energy-release rate governs debond growth. Results from the present analysis agree well with experimentally measured joint opening displacements.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGeometrically Nonlinear Analysis of Adhesively Bonded Joints
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225677
dc.journal.fristpage59
dc.journal.lastpage65
dc.identifier.eissn1528-8889
dc.keywordsAdhesives
dc.keywordsShear (Mechanics)
dc.keywordsFracture (Materials)
dc.keywordsFinite element analysis
dc.keywordsFailure AND Thickness
dc.treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record