Show simple item record

dc.contributor.authorS. Bhattacharyya
dc.date.accessioned2017-05-08T23:18:08Z
dc.date.available2017-05-08T23:18:08Z
dc.date.copyrightJanuary, 1984
dc.date.issued1984
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26896#50_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98573
dc.description.abstractThe creep-rupture behavior of six candidate Stirling engine iron-base superalloys was determined in air. The alloys included four wrought alloys (A-286, Alloy 800H, N-155, and 19-9DL) and two cast alloys (CRM-6D and XF-818). The specimens were tested to rupture for times up to 3000 h at 650° to 925°C. Rupture life (tr ), minimum creep rate (ε̇m ), and time to 1 percent creep strain (t0.01 ), were statistically analyzed as a function of stress and temperature. Estimated stress levels at different temperatures to obtain 3500 h tr and t0.01 lives were determined. These data will be compared with similar data being obtained under 15 MPa hydrogen.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep-Rupture Behavior of Six Candidate Stirling Engine Superalloys Tested in Air
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225676
dc.journal.fristpage50
dc.journal.lastpage58
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsSuperalloys
dc.keywordsStirling engines
dc.keywordsRupture
dc.keywordsAlloys
dc.keywordsStress
dc.keywordsTemperature
dc.keywordsHydrogen AND Iron
dc.treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record