Show simple item record

dc.contributor.authorY. Mutoh
dc.contributor.authorM. Toyoda
dc.contributor.authorS. Doi
dc.contributor.authorK. Satoh
dc.date.accessioned2017-05-08T23:18:08Z
dc.date.available2017-05-08T23:18:08Z
dc.date.copyrightJanuary, 1984
dc.date.issued1984
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26896#16_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98567
dc.description.abstractFracture toughness tests of specimens in which the crack fronts consist of the weld metal region, the HAZ, and the base metal region have been carried out. It seems that, even in the case of the specimens, the stretched zone width can be a proper parameter of fracture toughness. It is necessary to take note of the stretched zone width in the lower toughness region in estimating the macroscopic and average value of fracture toughness of the specimen. It is satisfactory to consider that the critical COD values of the specimens used here, even though the weld metal region is away from the center of thickness, are roughly equal to those of specimens of which the crack front is completely in the weld metal.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Toughness Evaluation of the Heterogeneous Bond Region in HT80 Steel Weldments
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225670
dc.journal.fristpage16
dc.journal.lastpage20
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsFracture toughness
dc.keywordsMetals
dc.keywordsFracture (Materials)
dc.keywordsBase metals
dc.keywordsThickness AND Toughness
dc.treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record