Show simple item record

dc.contributor.authorW. Johnson
dc.contributor.authorY. L. Bai
dc.contributor.authorS. K. Ghosh
dc.date.accessioned2017-05-08T23:18:06Z
dc.date.available2017-05-08T23:18:06Z
dc.date.copyrightApril, 1984
dc.date.issued1984
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26898#167_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98555
dc.description.abstractThis paper derives from a study of grinding wheel break-up behavior due to impact. The impact fracture characteristics of circular disks of plaster of Paris with a concentric central hole were studied experimentally [1] for three types of loading: (a) when the disks were suspended freely and loaded intensely at one point on their circumference by an explosive detonator; (b) when the disks were allowed to fall under gravity from a certain height on to a rigid base; and (c) when a disk, resting on a rigid base, was struck by a flat ended rigid body which was dropped on to it from a certain height. Quasi-static flattening tests on the disks were also carried out. The paper describes a theoretical investigation into the stress analysis of disks under impact, classifies the relevant damage sustained by them and attempts to unify the “gross” impact fracture patterns which arise in different modes of dynamic loading. The extent of local flattening of the quasi-statically loaded disks before fracture, is also reported. Good correlation between the theory and experimental results is obtained, especially for rings of diameter ratio (Di /D0 ) of around 0.5.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGross Crack Initiation and Propagation in Brittle Thin Solid and Annular Disks Subjected to Impact Loading
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225694
dc.journal.fristpage167
dc.journal.lastpage172
dc.identifier.eissn1528-8889
dc.keywordsBrittleness
dc.keywordsFracture (Materials)
dc.keywordsDisks
dc.keywordsFracture (Process)
dc.keywordsGravity (Force)
dc.keywordsPlaster of paris
dc.keywordsGrinding wheels
dc.keywordsDynamic testing (Materials)
dc.keywordsStress analysis (Engineering) AND Explosives
dc.treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record