| dc.contributor.author | Nozomu Kawai | |
| dc.contributor.author | Hiroyuki Saiki | |
| dc.contributor.author | Tamotsu Nakamura | |
| dc.date.accessioned | 2017-05-08T23:18:04Z | |
| dc.date.available | 2017-05-08T23:18:04Z | |
| dc.date.copyright | July, 1984 | |
| dc.date.issued | 1984 | |
| dc.identifier.issn | 0094-4289 | |
| dc.identifier.other | JEMTA8-26899#257_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/98540 | |
| dc.description.abstract | To examine the seizure mechanism in cold extrusion and forging, a bifurcating extrusion type friction testing machine has been manufactured by the authors. This friction testing method was devised to simulate the frictional surface in the process accompanied with a remarkable surface expansion which influences markedly the seizure phenomena in extrusion and forging. Using a commercially pure aluminium as the workmetal, the frictional characteristics, and in particular the seizure mechanism, have been investigated under a lubricated condition with a mineral oil of higher viscosity and a dry frictional condition. Under the lubricated condition, the frictional surface was remarkably expanded more than 26 times; nevertheless no seizure was observed throughout the extruded travel. On the other hand, under the dry frictional condition, the seizure is initiated at the region where a virgin surface is exposed or the relative slip displacement exceeds a critical value. It was observed that even in the dry frictional condition, a smooth burnished metal surface could be obtained if the surface expansion ratio and the relative slip displacement are lower than a critical value. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Seizure Mechanism in Cold Extrusion and Forging | |
| dc.type | Journal Paper | |
| dc.journal.volume | 106 | |
| dc.journal.issue | 3 | |
| dc.journal.title | Journal of Engineering Materials and Technology | |
| dc.identifier.doi | 10.1115/1.3225712 | |
| dc.journal.fristpage | 257 | |
| dc.journal.lastpage | 263 | |
| dc.identifier.eissn | 1528-8889 | |
| dc.keywords | Forging | |
| dc.keywords | Extruding | |
| dc.keywords | Mechanisms | |
| dc.keywords | Friction | |
| dc.keywords | Testing | |
| dc.keywords | Displacement | |
| dc.keywords | Travel | |
| dc.keywords | Mineral oil | |
| dc.keywords | Aluminum | |
| dc.keywords | Machinery | |
| dc.keywords | Viscosity AND Metal surfaces | |
| dc.tree | Journal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 003 | |
| dc.contenttype | Fulltext | |