Show simple item record

dc.contributor.authorR. Glardon
dc.contributor.authorS. Chavez
dc.contributor.authorI. Finnie
dc.date.accessioned2017-05-08T23:18:04Z
dc.date.available2017-05-08T23:18:04Z
dc.date.copyrightJuly, 1984
dc.date.issued1984
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26899#248_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98538
dc.description.abstractA mechanical test which is believed to simulate the conditions occurring in sliding wear is described. It involves the cyclic plastic deformation of metals under combined compression and shear. The results of tests on six alloys are reported and correlated with those from wear tests. On this basis, an expression is proposed for the sliding wear rate which is based on material behavior during cyclic plastic deformation and involves three material properties. The implications of this expression for the wear rate are discussed and directions for future work are suggested.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Simulation of Sliding Wear by Cyclic Plastic Deformation Under Combined Stresses
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225710
dc.journal.fristpage248
dc.journal.lastpage252
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsWear
dc.keywordsSimulation
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsMaterials properties
dc.keywordsCompression
dc.keywordsMechanical testing
dc.keywordsWear testing
dc.keywordsMetals AND Alloys
dc.treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record