Show simple item record

dc.contributor.authorA. Thangaraj
dc.contributor.authorM. Nissle
dc.contributor.authorP. K. Wright
dc.date.accessioned2017-05-08T23:18:04Z
dc.date.available2017-05-08T23:18:04Z
dc.date.copyrightJuly, 1984
dc.date.issued1984
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26899#242_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98537
dc.description.abstractUsing metallographic and microhardness techniques, temperature distributions have been determined in twist drills. The methods rely on the fact that certain high speed steel materials exhibit microstructural changes when subjected to temperatures greater than 600°C. Quick-stop specimens have also been obtained to study the metal flow patterns over the drill flutes. These results have been used to comment on the different wear mechanisms that affect the performance of a twist drill. Preliminary results show that bulk plastic flow occurs near the margin of the drill where the temperatures are in the vicinity of 900°C when machining AISI 1045 steel at 40 m/min.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNew Experiments on the Temperature Distribution in Drilling
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225709
dc.journal.fristpage242
dc.journal.lastpage247
dc.identifier.eissn1528-8889
dc.keywordsDrilling
dc.keywordsTemperature distribution
dc.keywordsDrills (Tools)
dc.keywordsTemperature
dc.keywordsMetals
dc.keywordsMachining
dc.keywordsSteel
dc.keywordsTool steel
dc.keywordsMicrohardness
dc.keywordsFlow (Dynamics)
dc.keywordsDeformation
dc.keywordsWear AND Mechanisms
dc.treeJournal of Engineering Materials and Technology:;1984:;volume( 106 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record