Show simple item record

dc.contributor.authorR. H. Bennett
dc.contributor.authorG. F. Merrill
dc.contributor.authorW. J. Burton
dc.contributor.authorG. Almagor
dc.contributor.authorF. A. Bowles
dc.contributor.authorD. N. Lambert
dc.contributor.authorF. L. Nastav
dc.date.accessioned2017-05-08T23:17:39Z
dc.date.available2017-05-08T23:17:39Z
dc.date.copyrightMarch, 1984
dc.date.issued1984
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26396#120_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98344
dc.description.abstractThe northern margin of St. Croix, V.I. is characterized by three morphological features: a narrow shallow water carbonate shelf; a steep slope; and a deep-sea basin. Shallow water reef material and carbonate debris occurs along the shelf. A thin carbonate ooze overlies the steep slope where occasionally rock outcrops occur. Trough sediments are clayey silts and turbidite deposits. Average shear strengths range between 3.1–10.0 kPa for the slope and 5.8–28.3 kPa for the trough (1-m cores). Values range as high as 69.1 kPa at sediment depths greater than one meter. Average sensitivities range between 3.2–6.1 for the slope and 4.1–12.1 for the trough (upper 1 m). Higher sensitivities [8–12] indicate the presence of metastable deposits and considerable strength loss upon disturbance. Variation in the sand, silt, and clay sized fractions, the nature of the carbonate particles, and bioturbation strongly affect the variability in the geotechnical properties. Quantitative studies of local morphology, processes and sediment properties reveal the need for detailed data in specific areas of engineering interest.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGeotechnical and Geological Factors Affecting Offshore Engineering and Seabed Utilization on a Carbonate Margin: St. Croix, V.I.
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231007
dc.journal.fristpage120
dc.journal.lastpage129
dc.identifier.eissn1528-8994
dc.keywordsSands
dc.keywordsParticulate matter
dc.keywordsShear (Mechanics)
dc.keywordsOcean engineering
dc.keywordsRocks
dc.keywordsSediments
dc.keywordsWater
dc.keywordsSeas AND Seabed
dc.treeJournal of Energy Resources Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record