Show simple item record

dc.contributor.authorT. E. Osterkamp
dc.contributor.authorJ. P. Gosink
dc.date.accessioned2017-05-08T23:17:38Z
dc.date.available2017-05-08T23:17:38Z
dc.date.copyrightMarch, 1984
dc.date.issued1984
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26396#96_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98340
dc.description.abstractA reconnaissance level study of the Pilgrim Springs geothermal system was conducted to determine the near-surface thermal regime and to obtain information on the ground water flow regime within the thawed ground area. Measurements included soil temperatures, apparent electrical conductivity of the soil, electrical conductivity and temperature in the Pilgrim River, saturated hydraulic conductivity of the soil and ground water flow characteristics (direction and velocity). In addition the size, number and characteristics (geometry, direction of flow) of near-surface convective plumes were investigated. Measured temperature profiles were used to estimate ground water flow velocities. There are approximately 2–3 km2 of thawed ground surrounded by permafrost on the order of 100 m in thickness. The highest temperatures were found in the southwest quadrant of the thawed area where a pool of ground water at ≈ 92°C exists at 14–32 m below the ground surface. Temperature measurements suggest that water in the pool is flowing laterally and vertically. Temperature and electrical conductivity measurements suggest that this pool of water underlies most of the thawed ground area although the possibility of several, unconnected sources of hot water and multiple pools has not been ruled out. Conductivity measurements suggest that hot and/or saline water rises in convective plumes from the pool at about 40–60 sites. The Pilgrim River appears to be heated by heat transfer from the geothermal area. Saline ground water enters the Pilgrim River, probably through its bed, increasing the conductivity of the river water.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Reconnaissance Study of the Hydrothermal Characteristics of Pilgrim Springs, Alaska
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231031
dc.journal.fristpage96
dc.journal.lastpage102
dc.identifier.eissn1528-8994
dc.keywordsSprings
dc.keywordsGroundwater
dc.keywordsWater
dc.keywordsRivers
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsMeasurement
dc.keywordsConductivity
dc.keywordsElectrical conductivity
dc.keywordsSoil
dc.keywordsPlumes (Fluid dynamics)
dc.keywordsGeothermal engineering
dc.keywordsGeometry
dc.keywordsTemperature measurement
dc.keywordsHot water
dc.keywordsHeat transfer
dc.keywordsTemperature profiles AND Thickness
dc.treeJournal of Energy Resources Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record