Show simple item record

dc.contributor.authorM. M. Salama
dc.contributor.authorJ. H. Tetlow
dc.date.accessioned2017-05-08T23:17:37Z
dc.date.available2017-05-08T23:17:37Z
dc.date.copyrightMarch, 1984
dc.date.issued1984
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26396#32_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98329
dc.description.abstractThe development of the tension leg platform (TLP) for the Hutton Field in the North Sea represents the first application of this deepwater concept. The use of vertical tension legs as the mooring system is the most novel part of the TLP design. One of the unique features of the tension legs is the use of 92.5-mm (3.64-in.) thick tubulars forged from 3 1/2 percent Ni-Cr-Mo-V high-strength steel (795 MPa (115.3 ksi) minimum yield strength) as mooring elements. Because of the importance of these elements to the survival of the TLP, the chemical composition and the steelmaking procedure were critically examined and optimized. In addition, extensive evaluation of the corrosion fatigue behavior of the steel was undertaken. This paper discusses the basis for the steel selection and specification, the results of the rigorous corrosion fatigue test program, and the assessment of the variation of properties along the length and through the thickness of full-size components. These results illustrate the suitability of the proposed high-strength steel for the mooring system application and establish confidence in both steelmaking and quality control procedures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSelection and Evaluation of High-Strength Steel for Hutton TLP Tension Leg Elements
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231020
dc.journal.fristpage32
dc.journal.lastpage37
dc.identifier.eissn1528-8994
dc.keywordsHigh strength steel
dc.keywordsTension
dc.keywordsTension-leg platforms
dc.keywordsMooring
dc.keywordsSteel
dc.keywordsIron and steel making
dc.keywordsCorrosion
dc.keywordsDesign
dc.keywordsFatigue testing
dc.keywordsQuality control
dc.keywordsFatigue
dc.keywordsNorth Sea
dc.keywordsThickness AND Yield strength
dc.treeJournal of Energy Resources Technology:;1984:;volume( 106 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record