Show simple item record

dc.contributor.authorA. Singh
dc.contributor.authorR. McClintock
dc.date.accessioned2017-05-08T23:17:35Z
dc.date.available2017-05-08T23:17:35Z
dc.date.copyrightJune, 1984
dc.date.issued1984
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26398#257_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98315
dc.description.abstractAn ultrasonic thickness measurement by beam alignment (TMBA) system developed by Southwest Research Institute was tested on underwater corroded steel piles at the Port Hueneme Harbor near Los Angeles, California. This ultrasonic system measures the thickness of steel piles by alignment of a focused ultrasonic transducer over a pit formed on the pile by corrosion. Tests conducted at the harbor demonstrated the ability of the system to measure the thickness of corrosion-pitted piles underwater at depths ranging from 0.3 m to 2.2 m (1 to 7 ft) below the water level. The tests also demonstrated that the system was successful in measuring the thickness of rough piles—that is, those with less corrosion—as well as pitted piles. Thus, the TMBA system is feasible as an overall approach to thickness measurement.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUnderwater Tests on Corroded Steel Piles With the Thickness Measurement by Beam Alignment System
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231048
dc.journal.fristpage257
dc.journal.lastpage259
dc.identifier.eissn1528-8994
dc.keywordsSteel
dc.keywordsThickness measurement
dc.keywordsCorrosion
dc.keywordsThickness
dc.keywordsSurface roughness
dc.keywordsUltrasonic transducers AND Water
dc.treeJournal of Energy Resources Technology:;1984:;volume( 106 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record