Show simple item record

dc.contributor.authorL. D. Power
dc.contributor.authorD. A. Hayes
dc.contributor.authorC. P. Brown
dc.date.accessioned2017-05-08T23:17:31Z
dc.date.available2017-05-08T23:17:31Z
dc.date.copyrightDecember, 1984
dc.date.issued1984
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26401#489_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98271
dc.description.abstractExxon’s Mississippi Canyon 280-A (Lena) platform represents the first commercial application of the guyed tower concept for offshore drilling and production platforms. Unlike a conventional offshore platform, the guyed tower is held upright by an array of guylines attached near the upper end of the structure and radiating outward to anchor piles driven into the seabed. This paper describes the functional requirements of the various components of this unique guying system and shows how each component was designed to meet those requirements. Among the design parameters discussed are guying system stiffness and strength, fatigue and wear life, corrosion protection, and assembly. The major length of the guyline consists of spiral-wound bridge strand, most of which is sheathed in polyethylene. The cable constructions and terminations are described. Near the tower, the sheathed cable is connected to a length of bare cable which passes through a special fairlead arrangement to direct the cable to the upper attachment above the water line. The fairlead arrangement and the upper attachment are described as well as the means provided to protect the bare cable from corrosion. Unique pinned connections in the system are designed to ease assembly while still providing the required load capacity and service life. A special anchor pile attachment eye design allows for large tolerances in anchor pile orientation. A description of the clump weight shows how this component is designed to achieve the desired system stiffness while also providing stability against overturning or excessive settlement into the seabed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDesign of Guylines for the Lena Guyed Tower
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231112
dc.journal.fristpage489
dc.journal.lastpage495
dc.identifier.eissn1528-8994
dc.keywordsDesign
dc.keywordsGuyed towers
dc.keywordsGuy wires
dc.keywordsCables
dc.keywordsManufacturing
dc.keywordsCorrosion
dc.keywordsSeabed
dc.keywordsStiffness
dc.keywordsWater
dc.keywordsOffshore platforms
dc.keywordsUnderwater drilling
dc.keywordsService life (Equipment)
dc.keywordsStress
dc.keywordsWeight (Mass)
dc.keywordsStability
dc.keywordsFatigue AND Wear
dc.treeJournal of Energy Resources Technology:;1984:;volume( 106 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record