Show simple item record

dc.contributor.authorR. E. Reid
dc.date.accessioned2017-05-08T23:17:29Z
dc.date.available2017-05-08T23:17:29Z
dc.date.copyrightDecember, 1984
dc.date.issued1984
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26401#393_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/98256
dc.description.abstractThe kinematics of a gyrocompass configuration whereby the binnacle is pendulously mounted inside a set of gimbals, commonly installed on commercial marine vessels, is examined under vessel pitch and roll motions. The gimballing errors of this gyrocompass resulting from such motions are determined as a function of its geometry. It is shown that this design results in significantly greater errors than those resulting from the same configuration with one degree of freedom removed. This anomalous behavior is explained in terms of the compass geometry using approximate analytical techniques, the results of which compare well with experimental full-scale tests.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnomalous Behavior of a Marine Gyrocompass
dc.typeJournal Paper
dc.journal.volume106
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3231097
dc.journal.fristpage393
dc.journal.lastpage398
dc.identifier.eissn1528-8994
dc.keywordsKinematics
dc.keywordsMotion
dc.keywordsDegrees of freedom
dc.keywordsDesign
dc.keywordsErrors
dc.keywordsGeometry AND Vessels
dc.treeJournal of Energy Resources Technology:;1984:;volume( 106 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record