Show simple item record

dc.contributor.authorJ. M. Bloom
dc.date.accessioned2017-05-08T23:16:21Z
dc.date.available2017-05-08T23:16:21Z
dc.date.copyrightFebruary, 1983
dc.date.issued1983
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28218#28_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97551
dc.description.abstractThis paper presents a simple engineering procedure that the utility industry can use to assess the integrity of typical nuclear-grade pressure vessels. The procedure recognizes both brittle fracture and plastic collapse and is based on a set of proposed failure assessment curves which make up a safety/failure plane. The plane is defined by the stress intensity factor/fracture toughness ratio as the ordinate and the applied stress/reference plastic collapse stress ratio as the abscissa. The failure assessment procedure is based in part on the British Central Electricity Generating Board’s R-6 failure assessment diagram and the deformation plasticity solutions of the General Electric Company. Two parameters, a plastic collapse parameter (Sr ′ ) and linear elastic fracture mechanics parameter (Kr ′ ) are calculated by the user. The point (Sr ′ , Kr ′ ) is plotted on the appropriate failure assessment diagram. If the point lies inside the respective curve, the structure is safe from failure. Moreover, for a given pressure and a postulated or actual flaw size, the margin of safety of the structure can be simply determined. Consistent with Appendix A of Section XI, (Division 1) of the ASME Boiler and Pressure Vessel Code the procedure presented in this paper is limited to ferritic materials 4 in. (102 mm) and greater in thickness. Details of the derivation of the proposed set of failure assessment curves are provided along with a sample problem illustrating the use of these curves.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Procedure for the Assessment of the Structural Integrity of Nuclear Pressure Vessels
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264235
dc.journal.fristpage28
dc.journal.lastpage34
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsPlasticity
dc.keywordsDeformation
dc.keywordsFracture mechanics
dc.keywordsSafety
dc.keywordsPressure vessels
dc.keywordsStress
dc.keywordsEngineering processes and practices
dc.keywordsASME Boiler and Pressure Vessel Code
dc.keywordsBrittle fracture
dc.keywordsCollapse
dc.keywordsFailure
dc.keywordsFracture toughness
dc.keywordsThickness AND Reactor vessels
dc.treeJournal of Pressure Vessel Technology:;1983:;volume( 105 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record