| dc.contributor.author | C. Y. Yang | |
| dc.contributor.author | S. S. Palusamy | |
| dc.date.accessioned | 2017-05-08T23:16:20Z | |
| dc.date.available | 2017-05-08T23:16:20Z | |
| dc.date.copyright | February, 1983 | |
| dc.date.issued | 1983 | |
| dc.identifier.issn | 0094-9930 | |
| dc.identifier.other | JPVTAS-28218#16_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/97549 | |
| dc.description.abstract | The J values for a circumferential through crack in a 4-in. (101.6-mm) schedule 80 pipe subjected to axial and bending loads were determined. The Virtual Crack Extension (VCE) method was used to compute J values. The VCE calculated J values are then compared with those obtained by the differential potential energy method and a simplified fracture analysis method. Good comparisons are observed between the results obtained from all of these three methods up to a load level well above the first yield. Advantages of using VCE method are discussed. Experimental results are presented for an identical pipe, made of 304 wrought stainless steel, containing a circumferential through-wall crack and subjected to internal pressure and external bending moment. The VCE method is used to obtain the load versus J relationship from which the initiation load is estimated using the J initiation value obtained from compact tension specimens. This value is then compared to the initiation load determined by acoustic emission measurements. These two results agree within the estimated experimental scatter. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | VCE Method of J Determination for a Pressurized Pipe Under Bending | |
| dc.type | Journal Paper | |
| dc.journal.volume | 105 | |
| dc.journal.issue | 1 | |
| dc.journal.title | Journal of Pressure Vessel Technology | |
| dc.identifier.doi | 10.1115/1.3264232 | |
| dc.journal.fristpage | 16 | |
| dc.journal.lastpage | 22 | |
| dc.identifier.eissn | 1528-8978 | |
| dc.keywords | Pipes | |
| dc.keywords | Stress | |
| dc.keywords | Electromagnetic scattering | |
| dc.keywords | Acoustic emissions | |
| dc.keywords | Fracture (Process) | |
| dc.keywords | Stainless steel | |
| dc.keywords | Tension | |
| dc.keywords | Pressure | |
| dc.keywords | Measurement AND Potential energy | |
| dc.tree | Journal of Pressure Vessel Technology:;1983:;volume( 105 ):;issue: 001 | |
| dc.contenttype | Fulltext | |