Show simple item record

dc.contributor.authorS. S. Sattinger
dc.date.accessioned2017-05-08T23:16:16Z
dc.date.available2017-05-08T23:16:16Z
dc.date.copyrightAugust, 1983
dc.date.issued1983
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28224#207_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97514
dc.description.abstractExperiments were conducted to confirm scaling relations for structural frequency response functions as applied to immersed shell structures using same-material, same-liquid scale models. Accelerance (acceleration/force) frequency response magnitude data were acquired for full-scale and half-scale versions of a fixed-free open cylinder mounted in a rigid vessel. The data confirmed that corresponding frequencies in the model and prototype were in proportion to the inverse of the geometric scale. The peak accelerance magnitudes were normalized by damping to form quantities which should scale despite differences in the corresponding modal damping values. Discrepancies in some of these normalized magnitudes coincided with angular mismatches in mode shapes attributed to minor manufacturing differences in the specimens. Thus, peak frequency responses for a prototype immersed shell structure can be estimated from scale model measurements if typical prototype damping values are known, but the locations of corresponding responses may differ between the model and the prototype in some cases.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperiments on the Determination of Immersed Shell Structure Mobilities via Scale Modeling
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264266
dc.journal.fristpage207
dc.journal.lastpage215
dc.identifier.eissn1528-8978
dc.keywordsModeling
dc.keywordsShells
dc.keywordsEngineering prototypes
dc.keywordsDamping
dc.keywordsFrequency response
dc.keywordsFunctions
dc.keywordsShapes
dc.keywordsCylinders
dc.keywordsFrequency
dc.keywordsForce
dc.keywordsMeasurement
dc.keywordsManufacturing AND Vessels
dc.treeJournal of Pressure Vessel Technology:;1983:;volume( 105 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record