Show simple item record

dc.contributor.authorR. A. Whipple
dc.contributor.authorJ. Hagstrom
dc.contributor.authorH. Dykstra
dc.date.accessioned2017-05-08T23:16:16Z
dc.date.available2017-05-08T23:16:16Z
dc.date.copyrightAugust, 1983
dc.date.issued1983
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28224#201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97513
dc.description.abstractStresses and displacements for a nozzle connection typical of those found in a large storage or pressure vessel were measured for applied radial forces, circumferential moments and longitudinal moments. The test program was conducted on a 2 1/2-in. φ penetration, centered and welded into a 60 in. × 60 in. cylindrical panel with a radius to thickness ratio of 1264. The nozzle diameter to cylindrical shell diameter ratio was 0.01. The panel edges were bolted to a stiff rectangular frame. This report presents the measured radial deflections and nozzle rotations, the membrane stress resultants and shell bending moments in the vicinity of the penetration for the three loadings. A brief description of the model and the test procedure is also presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Investigation of Cylindrical Shell Stresses due to Penetration Loads Where R/T = 1264
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264265
dc.journal.fristpage201
dc.journal.lastpage206
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsPipes
dc.keywordsNozzles
dc.keywordsDeflection
dc.keywordsMembranes
dc.keywordsShells
dc.keywordsStorage
dc.keywordsThickness
dc.keywordsStructural frames
dc.keywordsForce AND Pressure vessels
dc.treeJournal of Pressure Vessel Technology:;1983:;volume( 105 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record