Show simple item record

dc.contributor.authorL. H. Sobel
dc.date.accessioned2017-05-08T23:16:15Z
dc.date.available2017-05-08T23:16:15Z
dc.date.copyrightNovember, 1983
dc.date.issued1983
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28228#347_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97506
dc.description.abstractNumerical results based on the STAGSC-1 finite element computer program are presented for the geometrically nonlinear behavior of cylindrical shells subjected to inward-directed radial point loads. Three elastic shell problems are considered: the poked cylinder (single load at midlength), which is the problem of primary interest, and the venetian blind and pinched cylinder, which are check cases. Load versus displacement curves obtained for the three problems reveal that geometric nonlinear (large displacement) effects are important. For the poked cylinder it is concluded that the maximum at the limit point of the load-displacement curve corresponds to a small local snapping of the cylinder that does not result in a loss of load-carrying capacity. The paper also discusses certain features of STAGSC-1 that should be helpful to users of the program.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNonlinear Bending and Collapse Analyses of a Poked Cylinder and Other Point-Loaded Cylinders
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264292
dc.journal.fristpage347
dc.journal.lastpage355
dc.identifier.eissn1528-8978
dc.keywordsCollapse
dc.keywordsCylinders
dc.keywordsStress
dc.keywordsDisplacement
dc.keywordsShells
dc.keywordsComputer software
dc.keywordsLoad bearing capacity
dc.keywordsFinite element analysis AND Pipes
dc.treeJournal of Pressure Vessel Technology:;1983:;volume( 105 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record