Show simple item record

dc.contributor.authorR. L. Klueh
dc.date.accessioned2017-05-08T23:16:15Z
dc.date.available2017-05-08T23:16:15Z
dc.date.copyrightNovember, 1983
dc.date.issued1983
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28228#320_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97502
dc.description.abstractThe creep and creep-rupture properties of 13 heats of annealed 2 1/4 Cr-1 Mo steel were determined at 510 and 566°C (950 and 1050°F). The microstructures of all heats were primarily polygonal ferrite (75–80 percent); the balance was mostly bainite with 1–2 percent pearlite and scattered carbides. At each temperature the results indicated considerable data scatter for the high-stress (short rupture life) tests. As the stress was lowered, the creep and stress-rupture properties converged, which resulted in a decrease in the data scatter. Much of the variation and change in the properties could be attributed to the carbide precipitation reactions that occur in the steel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHeat-to-Heat Variations in Creep-Rupture Properties of Annealed 2 1/4 Cr-1 Mo Steel
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264288
dc.journal.fristpage320
dc.journal.lastpage328
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsHeat
dc.keywordsSteel
dc.keywordsRupture
dc.keywordsStress
dc.keywordsElectromagnetic scattering
dc.keywordsPrecipitation
dc.keywordsFerrites (Magnetic materials) AND Temperature
dc.treeJournal of Pressure Vessel Technology:;1983:;volume( 105 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record