Show simple item record

dc.contributor.authorY. S. Lee
dc.contributor.authorM. Raymund
dc.date.accessioned2017-05-08T23:16:14Z
dc.date.available2017-05-08T23:16:14Z
dc.date.copyrightNovember, 1983
dc.date.issued1983
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28228#309_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97498
dc.description.abstractThe behavior of semi-circular surface flaws in cylinders is of interest in the technology of pressure vessels. The object of this study is to determine the stress intensity factor distribution around the crack front under arbitrary loading conditions for a longitudinal semi-circular flaw with R i /t = 10; where R i is the inside radius of the cylinder, and t is the cylinder thickness. Six crack depths are studied under various loading conditions: a /t = 0.10, 0.25, 0.50, 0.65, 0.80, and 0.90, where a is the circular flaw radius. In general, the finite element method is used to determine the displacement solution. Parks’ stiffness derivative method is used to find the stress intensity factor distribution around the semi-circle. The immediate crack tip geometry is modeled by use of a “macro-element” containing over 1600 degrees of freedom. Four separate loadings are considered: 1) constant, 2) linear, 3) quadratic, and 4) cubic crack surface pressure. From these loadings, nondimensional magnification factors are derived to represent the resulting stress intensity factors. Comparisons are made with other investigators and results agree within 5 percent of published results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Intensity Factor Solutions for Internal Longitudinal Semi-Circular Surface Flaws in a Cylinder Under Arbitrary Loading
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264286
dc.journal.fristpage309
dc.journal.lastpage315
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsCylinders
dc.keywordsFracture (Materials)
dc.keywordsDegrees of freedom
dc.keywordsDisplacement
dc.keywordsGeometry
dc.keywordsStiffness
dc.keywordsThickness
dc.keywordsFinite element methods
dc.keywordsPressure AND Pressure vessels
dc.treeJournal of Pressure Vessel Technology:;1983:;volume( 105 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record