Show simple item record

dc.contributor.authorJ. O. Kumpulainen
dc.contributor.authorR. H. O. Rintamaa
dc.contributor.authorA. J. Ranta-Eskola
dc.date.accessioned2017-05-08T23:15:41Z
dc.date.available2017-05-08T23:15:41Z
dc.date.copyrightApril, 1983
dc.date.issued1983
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26892#119_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97195
dc.description.abstractThe influence of temperature on the flow stress and the uniform strain of steel, brass, aluminium and AISI 304 and 316 type stainless steels is determined by using uniaxial tensile tests. Sliding and stretching friction coefficients at several surface temperatures are measured for various sheets and lubricants using a bending under tension type strip drawing test. The validity of the results is verified by deep drawing experiments. The influence of temperature difference between the punch nose region and the flange on the drawing and fracture loads and on the limiting drawing ratio is determined.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Temperature on Deep Drawing of Sheet Metals
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225625
dc.journal.fristpage119
dc.journal.lastpage127
dc.identifier.eissn1528-8889
dc.keywordsFlow (Dynamics)
dc.keywordsFriction
dc.keywordsTemperature
dc.keywordsAluminum
dc.keywordsBrass (Metal)
dc.keywordsSteel
dc.keywordsLubricants
dc.keywordsSheet metal
dc.keywordsStress
dc.keywordsTemperature effects
dc.keywordsFlanges
dc.keywordsFracture (Process)
dc.keywordsStainless steel
dc.keywordsStrips AND Tension
dc.treeJournal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record