Show simple item record

dc.contributor.authorM. Sakane
dc.contributor.authorM. Ohnami
dc.date.accessioned2017-05-08T23:15:41Z
dc.date.available2017-05-08T23:15:41Z
dc.date.copyrightApril, 1983
dc.date.issued1983
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26892#75_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97187
dc.description.abstractFrequency and hold-time effects on fatigue lives of cylindrical notched specimens of SUS 316 stainless steel were studied at 600° C in air. From the tests, the following conclusions were obtained: Neuber’s rule, as used in the ASME N-47 Code, predicts very conservatively the life of notched specimens in tests without a hold-time. But it gives a nonconservative estimate for the reduction in the life of the material by the introduction of a hold-time. An empirical formula of a “frequency-elastic stress concentration factor modified equation” was obtained by analysing the experimental data. It predicts accurately the life of the notched specimen tested at different frequencies.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Study on the Notch Effect on the Low Cycle Fatigue of Metals in Creep-Fatigue Interacting Conditions at Elevated Temperature
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225629
dc.journal.fristpage75
dc.journal.lastpage80
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsFatigue
dc.keywordsTemperature
dc.keywordsMetals
dc.keywordsLow cycle fatigue
dc.keywordsStainless steel
dc.keywordsStress concentration
dc.keywordsEquations
dc.keywordsFormulas AND Frequency
dc.treeJournal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record