| dc.contributor.author | W. N. Findley | |
| dc.contributor.author | R. M. Reed | |
| dc.date.accessioned | 2017-05-08T23:15:40Z | |
| dc.date.available | 2017-05-08T23:15:40Z | |
| dc.date.copyright | July, 1983 | |
| dc.date.issued | 1983 | |
| dc.identifier.issn | 0094-4289 | |
| dc.identifier.other | JEMTA8-26893#202_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/97180 | |
| dc.description.abstract | Thick tubes of 32.3 mm (1.27 in.) ID and wall ratio of 2.5 for SAE 4333 steel were subjected to fatigue testing after the following treatments: normal autofrettage followed by thermal shock; electropolishing; electropolishing then normal autofrettage; electropolishing then normal autofrettage then thermal shock; electropolishing then open-ended autofrettage; tempering from Rc 36 down to Rc 29. Results showed a thermal shock of 600°C for 3 s reduced the fatigue strength of autofrettaged specimens 6 to 8 percent. Electropolishing reduced the fatigue strength 13 percent for as-received bores and 6 percent for autofrettaged bores. Double tempering to Rc 29 reduced the fatigue strength 57 percent compared to Rc 36. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Fatigue of Autofrettaged Thick Tubes: Effect of Thermal Shock, Electropolishing, and Tempering | |
| dc.type | Journal Paper | |
| dc.journal.volume | 105 | |
| dc.journal.issue | 3 | |
| dc.journal.title | Journal of Engineering Materials and Technology | |
| dc.identifier.doi | 10.1115/1.3225644 | |
| dc.journal.fristpage | 202 | |
| dc.journal.lastpage | 205 | |
| dc.identifier.eissn | 1528-8889 | |
| dc.keywords | Fatigue | |
| dc.keywords | Electrolytic polishing | |
| dc.keywords | Thermal shock | |
| dc.keywords | Autofrettage | |
| dc.keywords | Fatigue strength | |
| dc.keywords | Fatigue testing AND Steel | |
| dc.tree | Journal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 003 | |
| dc.contenttype | Fulltext | |