Show simple item record

dc.contributor.authorE. G. Thomsen
dc.date.accessioned2017-05-08T23:15:40Z
dc.date.available2017-05-08T23:15:40Z
dc.date.copyrightJuly, 1983
dc.date.issued1983
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26893#178_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97175
dc.description.abstractTough-pitch copper was drawn and extruded in multi-pass operations to effective strains of 1.53 or area reductions of 80 percent. It appears that residual stresses and mean pressure did not influence the behavior of the deformed materials as interpreted from tension and compression tests. It is suggested that the behavior of tough-pitch copper after deformation is similar to that observed by metallurgists in endurance tests and strongly indicates simultaneous strengthening and softening, through the combined process of dislocation strengthening (by multiplication, pinning and interaction) and softening by recovery.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress-Strain Properties of Tough-Pitch Copper After Multi-Pass Drawing and Extruding
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225640
dc.journal.fristpage178
dc.journal.lastpage181
dc.identifier.eissn1528-8889
dc.keywordsCopper
dc.keywordsExtruding
dc.keywordsStress
dc.keywordsToughness
dc.keywordsCompression
dc.keywordsDislocations
dc.keywordsTension
dc.keywordsResidual stresses
dc.keywordsPressure AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record