Show simple item record

dc.contributor.authorC. S. Hartley
dc.contributor.authorR. Srinivasan
dc.date.accessioned2017-05-08T23:15:40Z
dc.date.available2017-05-08T23:15:40Z
dc.date.copyrightJuly, 1983
dc.date.issued1983
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26893#162_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97171
dc.description.abstractCalculations of deformation behavior in metal forming operations require constitutive equations valid at large plastic strain. This work examines the quality of fit provided by two types of equations, an exponential form which generalizes power laws and a saturation-type relation, to data produced by isothermal, uniaxial testing of annealed 304 stainless steel and Zircaloy-4 at a constant total true strain rate and various temperatures. The use of annealed material reduces the number of independent parameters to three in the exponential equation and to four in the saturation-type equation. Physical reasoning places limits on the values of some parameters and identifies two with the true stress, σm , and true strain, εm , at the maximum load sustained by the specimen. Least-square fits of the data reveal that the Voce form of the saturation-type equation exhibits the lowest standard deviation of all equations studied. Material parameters representing σm , εm , and σs , the saturation stress, generally followed expected trends for the temperature dependence of measures of strength and ductility, except that εm , of 304 stainless steel tended to decrease with increasing temperature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleConstitutive Equations for Large Plastic Deformation of Metals
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225636
dc.journal.fristpage162
dc.journal.lastpage167
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsMetals
dc.keywordsConstitutive equations
dc.keywordsEquations
dc.keywordsStress
dc.keywordsTemperature
dc.keywordsStainless steel
dc.keywordsMetalworking
dc.keywordsDuctility AND Testing
dc.treeJournal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record