Show simple item record

dc.contributor.authorS. A. Meguid
dc.contributor.authorL. E. Malvern
dc.date.accessioned2017-05-08T23:15:39Z
dc.date.available2017-05-08T23:15:39Z
dc.date.copyrightJuly, 1983
dc.date.issued1983
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26893#147_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97169
dc.description.abstractTension-torsion tests are reported on thin-walled tubes up to strains of the order of five percent. Attention was given to the question of whether, as has been suggested, in the continued loading after a sudden direction change in the deformation path, the behavior of the material quickly approaches that predicted by a von Mises plastic potential and isotropic hardening. The results show a slower approach of the deviatoric stress vector direction to the plastic strain-rate vector direction than had been expected, as well as considerable variations in the von Mises equivalent stress versus equivalent plastic strain curves.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental Investigation Into the Plastic Flow and Strain Hardening of Mild Steel Under Proportional and Abruptly Changing Deformation Paths at a Controlled Rate
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225634
dc.journal.fristpage147
dc.journal.lastpage154
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsSteel
dc.keywordsWork hardening
dc.keywordsStress
dc.keywordsHardening
dc.keywordsTorsion AND Tension
dc.treeJournal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record