Show simple item record

dc.contributor.authorL. J. Wolf
dc.contributor.authorR. M. Mains
dc.date.accessioned2017-05-08T23:15:39Z
dc.date.available2017-05-08T23:15:39Z
dc.date.copyrightOctober, 1983
dc.date.issued1983
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26895#313_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97165
dc.description.abstractIncremental failure was observed when two different loading conditions, pressure and expansion, were applied alternatively to an expansion joint. Neither of the conditions was capable independently of failing the expansion joint. When the conditions occurred together, only a small amount of plasticity was observed. But when the expansion was cycled while holding pressure constant, incremental plastic deformation occurred during each cycle which was cumulative to that of past cycles. The joint was dimensionally unstable over a large number of expansion cycles. Analytical and experimental results are presented in an attempt to explain the observed phenomenon.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleIncremental Failure of an Expansion Joint During Combined Pressure and Expansion Loading
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225664
dc.journal.fristpage313
dc.journal.lastpage318
dc.identifier.eissn1528-8889
dc.keywordsPressure
dc.keywordsExpansion joints
dc.keywordsFailure
dc.keywordsCycles
dc.keywordsPlasticity AND Deformation
dc.treeJournal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record