Show simple item record

dc.contributor.authorK. D. Challenger
dc.contributor.authorP. G. Vining
dc.date.accessioned2017-05-08T23:15:39Z
dc.date.available2017-05-08T23:15:39Z
dc.date.copyrightOctober, 1983
dc.date.issued1983
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26895#280_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97160
dc.description.abstractThe effects of various loading wave forms on the fatigue crack growth rate of 2 1/4 Cr-1Mo steel at 482 and 538°C tested in air have been determined. Scanning electron fractography was used to measure the fatigue striation spacing on the fracture surface of strain controlled push-pull fatigue tests. The fatigue striation spacing was then used as a monitor of the fatigue crack growth rate in these specimens once a fatigue crack had been initiated. Constant strain hold periods were introduced during each cycle at various points of the hysteresis loop. Both increasing temperature and strain range increased the fatigue crack growth rate for continuously cycled tests as expected. However, when a hold period was introduced, the crack growth rate was dominated by the time that preceded each strain reversal; temperature and strain range effects became secondary to hold time. The effect of hold periods for the conditions examined is primarily crack tip oxidation rather than creep crack growth during the hold period.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effects of Hold Period on the Fatigue Crack Growth Rate of 2 1/4 Cr-1Mo Steel at Elevated Temperatures
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225659
dc.journal.fristpage280
dc.journal.lastpage285
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsFatigue cracks
dc.keywordsFatigue
dc.keywordsCreep
dc.keywordsElectrons
dc.keywordsWaves
dc.keywordsFracture (Process)
dc.keywordsCycles
dc.keywordsFatigue testing
dc.keywordsFractography AND oxidation
dc.treeJournal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record