Show simple item record

dc.contributor.authorR. A. Riddle
dc.contributor.authorR. D. Streit
dc.contributor.authorI. Finnie
dc.date.accessioned2017-05-08T23:15:39Z
dc.date.available2017-05-08T23:15:39Z
dc.date.copyrightOctober, 1983
dc.date.issued1983
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26895#268_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97158
dc.description.abstractA compact shear specimen configuration, consisting of three legs with the outer two loaded axially in a direction opposite to the inner one, has been used for several mixed-mode fracture studies. From a detailed computer analysis of this specimen, it is shown that the loading boundary conditions play an extremely important role in determining the state of stress at the crack tip. By simply changing the flexibility of the loading fixture, the specimen can be subjected to a range of mixed mode conditions from almost all Mode I to virtually pure Mode II. Data of other researchers are reviewed in light of this finding. It is shown that by applying loads obliquely to the outer legs pure Mode I loading may also be obtained with this specimen.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Evaluation of the Compact Shear Specimen for Mixed Mode Fracture Studies
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225657
dc.journal.fristpage268
dc.journal.lastpage272
dc.identifier.eissn1528-8889
dc.keywordsShear (Mechanics)
dc.keywordsFracture (Process)
dc.keywordsStress
dc.keywordsJigs and fixtures
dc.keywordsPlasticity
dc.keywordsComputers AND Boundary-value problems
dc.treeJournal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record