Show simple item record

dc.contributor.authorWilliam N. Sharpe
dc.contributor.authorMichael Ward
dc.date.accessioned2017-05-08T23:15:38Z
dc.date.available2017-05-08T23:15:38Z
dc.date.copyrightOctober, 1983
dc.date.issued1983
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26895#235_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/97152
dc.description.abstractPlastic strains at the roots of notched specimens of Inconel 718 subjected to tension-compression cycling at 650°C are reported. These strains were measured with a laser-based technique over a gage length of 0.1 mm and are intended to serve as “benchmark” data for further development of experimental, analytical, and computational approaches. The specimens were 250 mm by 2.5 mm in the test section with double notches of 4.9 mm radius subjected to axial loading sufficient to cause yielding at the notch root on the tensile portion of the first cycle. The tests were run for 1000 cycles at 10 cpm or until cracks initiated at the notch root. The experimental techniques are described, and then representative data for the various load spectra are presented. All the data for each cycle of every test are available on floppy disks from NASA.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleBenchmark Cyclic Plastic Notch Strain Measurements
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225652
dc.journal.fristpage235
dc.journal.lastpage241
dc.identifier.eissn1528-8889
dc.keywordsSpectra (Spectroscopy)
dc.keywordsLasers
dc.keywordsGages
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsDisks
dc.keywordsCompression
dc.keywordsCycles
dc.keywordsStrain measurement AND Tension
dc.treeJournal of Engineering Materials and Technology:;1983:;volume( 105 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record