Show simple item record

dc.contributor.authorA. Royer
dc.contributor.authorM. Gantois
dc.contributor.authorB. Dumas
dc.date.accessioned2017-05-08T23:15:20Z
dc.date.available2017-05-08T23:15:20Z
dc.date.copyrightMarch, 1983
dc.date.issued1983
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26389#97_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96998
dc.description.abstractMany parts either for sea-line pipes as “buckle” or “crack arrestor,” or for structures may require the use of wall tubular products with high mechanical properties. Such heavy-wall pipes may be produced by centrifugal casting. Two Mn-Mo steels have been developed for medium-wall pipes (e≤35 mm) to be used under very severe climatic conditions: an acicular ferritic steel, a pearlite reduced steel produced by controlled rolling techniques [1, 2, 3]. More alloyed chemical composition and heat-treatments are needed to produce heavy-wall pipes. Then, production of such pipes is more difficult and sometimes impossible. Observations made on controlled-rolled Mn-Mo steel led to a better understanding of the influence of metallurgical structures and chemical composition on steel characteristics. Similar metallurgical structures can only be reached via other routes, for example centrifugal-casting of steel associated with heat-treatment, lead to the production of heavy-wall pipes with high strength and suitable transition temperature. After a brief description of the centrifugal casting technique, we introduce the grades developed for heavy-wall pipes with yield strength up to 100,000 psi. The mechanical properties, Battelle, fatigue, static bending, C.O.D., weldability, etc., of Centrishore II are given and compared to other materials. Possible offshore applications and other potential applications of parts produced by centrifugal casting are described.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSpun Steel Pipes for the Offshore Industry
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230887
dc.journal.fristpage97
dc.journal.lastpage102
dc.identifier.eissn1528-8994
dc.keywordsSteel
dc.keywordsOcean engineering
dc.keywordsPipes
dc.keywordsCasting
dc.keywordsMechanical properties
dc.keywordsYield strength
dc.keywordsSeas
dc.keywordsHeat treating (Metalworking)
dc.keywordsPhase transition temperature
dc.keywordsFracture (Materials)
dc.keywordsFatigue AND Heat
dc.treeJournal of Energy Resources Technology:;1983:;volume( 105 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record