Show simple item record

dc.contributor.authorC. D. Shinners
dc.contributor.authorA. Abel
dc.date.accessioned2017-05-08T23:15:18Z
dc.date.available2017-05-08T23:15:18Z
dc.date.copyrightJune, 1983
dc.date.issued1983
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26390#170_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96963
dc.description.abstractThe changing strain distribution within large-scale tubular T joints, subjected to fully reversed axial brace fatigue loading, were measured in as-welded and stress-relieved conditions. Initial static loading enabled estimation of stress concentration factors and comparisons with the predictions of available published formulas. Dynamic load amplitudes were selected to give approximately equal hot-spot strains in all joints, thus facilitating direct comparison between specimens with different dimensions. Post-weld heat treatment increased the cycles needed for crack initiation and also reduced the crack propagation rates.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Fatigue Behavior of Large-Scale As-Welded and Stress-Relieved Tubular T Joints
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230898
dc.journal.fristpage170
dc.journal.lastpage176
dc.identifier.eissn1528-8994
dc.keywordsStress
dc.keywordsFatigue
dc.keywordsDimensions
dc.keywordsHeat treating (Metalworking)
dc.keywordsStress concentration
dc.keywordsFracture (Materials)
dc.keywordsBracing (Construction)
dc.keywordsCrack propagation
dc.keywordsCycles AND Formulas
dc.treeJournal of Energy Resources Technology:;1983:;volume( 105 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record