Show simple item record

dc.contributor.authorT. E. Osterkamp
dc.contributor.authorK. Kawasaki
dc.contributor.authorJ. P. Gosink
dc.date.accessioned2017-05-08T23:15:18Z
dc.date.available2017-05-08T23:15:18Z
dc.date.copyrightJune, 1983
dc.date.issued1983
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26390#156_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96960
dc.description.abstractVariations in the electrical conductivity of a soil and water system with temperature and salt concentration suggest that a soil containing hot and/or saline groundwater may be expected to have a higher conductivity compared to a cooler and/or less saline system. Temperature and conductivity surveys were carried out at Pilgrim Springs, on the Seward Peninsula, and at Chena Hot Springs, near Fairbanks, to test the use of a magnetic induction method (which measures electrical conductivity) for delineating near-surface hot groundwater sources in geothermal areas surrounded by permafrost. Comparison of the temperature data and conductivity data from these surveys demonstrates that the conductivity anomalies, as measured by the magnetic induction method, can be used to define the precise location of hot groundwater sources in these geothermal areas with the higher temperatures correlating with higher values of conductivity. Magnetic induction measurements of conductivity can also be used to define the lateral extent of the thawed geothermal areas (used for calculating the stored energy) in permafrost terrain. The utility of these magnetic induction measurements of conductivity for reconnaissance geophysical surveys of geothermal areas is that a much greater density of data can be obtained in a shorter time in comparison with shallow temperature measurements. In addition, it is simpler, cheaper and easier (physically) to obtain the data. While conductivity anomalies can result from other than hot and/or saline groundwater, these conductivity data, when coupled with a few measured temperature profiles and groundwater samples, should result in reliable reconnaissance level geophysical surveys in Alaskan geothermal areas.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleShallow Magnetic Induction Measurements for Delineating Near-Surface Hot Groundwater Sources in Alaskan Geothermal Areas
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230895
dc.journal.fristpage156
dc.journal.lastpage161
dc.identifier.eissn1528-8994
dc.keywordsElectromagnetic induction
dc.keywordsMeasurement
dc.keywordsGeothermal engineering
dc.keywordsGroundwater
dc.keywordsConductivity
dc.keywordsTemperature
dc.keywordsSoil
dc.keywordsSprings
dc.keywordsElectrical conductivity
dc.keywordsDensity
dc.keywordsTemperature measurement
dc.keywordsTemperature profiles AND Water
dc.treeJournal of Energy Resources Technology:;1983:;volume( 105 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record