Show simple item record

dc.contributor.authorV. Sanghani
dc.contributor.authorC. U. Ikoku
dc.date.accessioned2017-05-08T23:15:16Z
dc.date.available2017-05-08T23:15:16Z
dc.date.copyrightSeptember, 1983
dc.date.issued1983
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26394#362_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96941
dc.description.abstractExperimental analysis was carried out to study the rheological properties of foam. Foam was generated by simultaneously injecting air and an aqueous solution of the foaming agent through a coiled tubing foam generator. Foam was injected at the bottom of an annulus with 4.0-in. (i.d.) casing diameter and 1.5-in. (o.d.) tubing diameter. Qualities ranged from 0.65 to 0.95. Shear rates ranged from 150 to 1000 sec−1 . Effective viscosities were calculated and were found to range from 60 to 500 cps. Results showed that flowing foam behaved as a pseudo-plastic fluid with no yield value; effective foam viscosity decreased with an increase in shear rate for a fixed quality. For shear rates in the range 500 sec−1 to 1000 sec−1 , the effective foam viscosity was independent of foam quality. This is useful since most field applications fall in this range.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRheology of Foam and Its Implications in Drilling and Cleanout Operations
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230929
dc.journal.fristpage362
dc.journal.lastpage371
dc.identifier.eissn1528-8994
dc.keywordsFluids
dc.keywordsViscosity
dc.keywordsDrilling
dc.keywordsTubing
dc.keywordsRheology
dc.keywordsShear (Mechanics)
dc.keywordsAnnulus
dc.keywordsExperimental analysis AND Generators
dc.treeJournal of Energy Resources Technology:;1983:;volume( 105 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record