Show simple item record

dc.contributor.authorA. C. Walker
dc.contributor.authorP. Davies
dc.date.accessioned2017-05-08T23:15:15Z
dc.date.available2017-05-08T23:15:15Z
dc.date.copyrightSeptember, 1983
dc.date.issued1983
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26394#263_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96924
dc.description.abstractEconomic and technical factors have lead to the use of J-tubes for the connection of subsea pipelines to fixed offshore production platforms. This paper describes some of the technical aspects of this method of installation. The design analysis presented provides basic information for the prediction of pull-in loads and associated support loadings for practical installations. The analysis is based on the results of, and observations made during, a series of tests on small-scale pipelines and J-tubes. Using the knowledge of the geometrical arrangement of the contact points between the riser and J-tube, the pull-in loads and riser strains can be estimated using simple mechanics. Use of the analysis is demonstrated by means of an example of its application to a typical J-tube design.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Design Basis for the J-Tube Method of Riser Installation
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230912
dc.journal.fristpage263
dc.journal.lastpage270
dc.identifier.eissn1528-8994
dc.keywordsDesign
dc.keywordsPipeline risers
dc.keywordsStress
dc.keywordsOcean engineering
dc.keywordsPipelines AND Underwater pipelines
dc.treeJournal of Energy Resources Technology:;1983:;volume( 105 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record