Show simple item record

dc.contributor.authorJ. R. Fowler
dc.contributor.authorE. F. Klementich
dc.contributor.authorJ. F. Chappell
dc.date.accessioned2017-05-08T23:15:14Z
dc.date.available2017-05-08T23:15:14Z
dc.date.copyrightDecember, 1983
dc.date.issued1983
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26395#574_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96919
dc.description.abstractThis paper describes testing and analysis which demonstrates that collapse specimens tested in short testers with rigid end seals give artificially high collapse values. It also compares the API collapse formulas with conventional strength of materials collapse criteria which incorporate ovality and finds the two approaches give very similar results. A statistical analysis indicates that ovality, while not nearly as important as yield strength and D/t , is important to collapse. Finally, it shows that pipe with lower ovality exhibits better collapse resistance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis and Testing of Factors Affecting Collapse Performance of Casing
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230972
dc.journal.fristpage574
dc.journal.lastpage579
dc.identifier.eissn1528-8994
dc.keywordsTesting
dc.keywordsCollapse
dc.keywordsFormulas
dc.keywordsStatistical analysis
dc.keywordsYield strength
dc.keywordsAmerican Petroleum Institute
dc.keywordsElectrical resistance
dc.keywordsStrength (Materials) AND Pipes
dc.treeJournal of Energy Resources Technology:;1983:;volume( 105 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record