Show simple item record

dc.contributor.authorD. M. Cole
dc.date.accessioned2017-05-08T23:15:13Z
dc.date.available2017-05-08T23:15:13Z
dc.date.copyrightDecember, 1983
dc.date.issued1983
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26395#454_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96899
dc.description.abstractThis work examines the effect of the rate of stress application on the creep behavior of polycrystalline ice. Stress rates from 10−3 to 1.84 MPa s−1 were used to achieve a creep stress of 3.6 MPa at test temperatures of −5° and −10°C. The treatment emphasizes the effect of stress application rate on primary creep behavior and the accompanying microfracturing activity. Acoustic emission measurements taken in all tests indicate the onset and rate peak of the microfracturing activity. The stress application rate has little effect on the minimum strain rate, the strain at which it occurs, or the characteristics of tertiary creep provided that the loading ramp ends prior to reaching the nominal failure strain of 1.0 percent. Primary creep behavior is significantly affected only at rates below about 10−2 MPa s−1 . Results indicate that when the loading ramp continues through the failure strain, no minimum strain rate occurs, but rather the strain rate increases monotonically throughout the entire test.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Stress Application Rate on the Creep Behavior of Polycrystalline Ice
dc.typeJournal Paper
dc.journal.volume105
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230952
dc.journal.fristpage454
dc.journal.lastpage459
dc.identifier.eissn1528-8994
dc.keywordsCreep
dc.keywordsStress
dc.keywordsIce
dc.keywordsFailure
dc.keywordsAcoustic emissions
dc.keywordsTemperature AND Measurement
dc.treeJournal of Energy Resources Technology:;1983:;volume( 105 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record