Show simple item record

dc.contributor.authorA. S. Kobayashi
dc.contributor.authorS. Mall
dc.contributor.authorM. Ramulu
dc.date.accessioned2017-05-08T23:14:11Z
dc.date.available2017-05-08T23:14:11Z
dc.date.copyrightFebruary, 1982
dc.date.issued1982
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28206#25_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96325
dc.description.abstractThe proposed test procedure for instrumented impact testings is evaluated by the experimental and numerical dynamic fracture results obtained for Homalite-100, polycarbonate, A533B steel and 6061 aluminum notched bend specimens. As expected, brittle fracture of the polymeric, steel and aluminum impacted notch bend specimens considered in this paper cannot be predicted by the static stress intensity factors at the instant of crack propagation. The fracture energy was only a fraction of the total energy and was equally unsuitable for dynamic fracture characterization of these specimens. This evaluation suggests that despite the enormous correlation studies which justify the use of static analysis for specific specimens under specified loading conditions, the proposed procedure should not be used to evaluate fracture data of impacted notch bend specimens of other configurations and loading rates.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleImpacted Notch Bend Specimens
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264180
dc.journal.fristpage25
dc.journal.lastpage30
dc.identifier.eissn1528-8978
dc.keywordsAluminum
dc.keywordsSteel
dc.keywordsStress
dc.keywordsFracture (Process)
dc.keywordsBrittle fracture AND Crack propagation
dc.treeJournal of Pressure Vessel Technology:;1982:;volume( 104 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record