Show simple item record

dc.contributor.authorN. R. Hughes
dc.contributor.authorT. P. Diaz
dc.contributor.authorV. V. Pestanas
dc.date.accessioned2017-05-08T23:14:07Z
dc.date.available2017-05-08T23:14:07Z
dc.date.copyrightNovember, 1982
dc.date.issued1982
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28215#344_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96292
dc.description.abstractThis paper describes the efforts toward qualification of induction heating stress improvement (IHSI) for mitigation of intergranular stress corrosion cracking (IGSCC) in Boiling Water Reactor (BWR) piping. The IHSI process, which is applied to piping after it is fully erected, produces compressive residual stresses on the pipe inside surface in the vicinity of the weld heat affected zone (HAZ). The creation of these compressive stresses has been confirmed by surface and through-wall strain gage and X-ray diffraction residual stress measurements on 4, 10, and 16-in. dia Schedule 80 welded and IHSI treated pipes. Confirmation of increased resistance to IGSCC due to the IHSI process has been accomplished by full-sized 4-in-dia pipe tests in General Electric’s Pipe Test Laboratory. The pipe test utilized an environment of oxygenated high-purity water at 288°C (550°F). Axial loads were applied which exceeded the material 288°C yield strength.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleQualification of Induction Heating Stress Improvement for Mitigation of Stress Corrosion Cracking
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264227
dc.journal.fristpage344
dc.journal.lastpage350
dc.identifier.eissn1528-8978
dc.keywordsStress corrosion cracking
dc.keywordsStress
dc.keywordsElectromagnetic induction
dc.keywordsHeating
dc.keywordsPipes
dc.keywordsBoiling water reactors
dc.keywordsCompressive stress
dc.keywordsStrain gages
dc.keywordsWater
dc.keywordsYield strength
dc.keywordsHeat
dc.keywordsMeasurement
dc.keywordsX-ray diffraction
dc.keywordsElectrical resistance AND Residual stresses
dc.treeJournal of Pressure Vessel Technology:;1982:;volume( 104 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record